Picture of Programmable Brushless Motors YNF-40A

Programmable Brushless Motors YNF-40A


Model airplane (including fixed wing, helicopter),model cars (including model vehicles, race cars), model ships, industrial products (including equipment, tools), ESC for medical products (including treatment, health care equipment)
(0)

Contact Supplier

Application of ESC:
Model airplane (including fixed wing, helicopter),model cars (including model vehicles, race cars), model ships, industrial products (including equipment, tools), ESC for medical products (including treatment, health care equipment)
Electrical performance parameters of ESC:
Input Voltage: 2-5LiPo batteries / 5-15 NiMh batteries 
Continuous current output: 40A
The maximum allowable instantaneous current (10S): 60A
BECtype: SBEC/UBEC/OPTO
BEC output: 5.5V/4A (SBEC), 5.5V/1A-4A (UBEC), 5.5V/1A (OPTO)
Standardconfiguration: UBEC 5.5V/4A
Shape and weight of ESC:
Dimensions (Length﹡Width﹡Height): 70*32*13
Weight: 51G (with BEC), 46G (OPTO)
Positive and negative power wires: wire size14#; Material: Copper SiliconeWire; Color:+ Red -Black; Length: 100 (mm)
UVW wire: wire size: 14 #; Material: Copper Silicone Wire; Color: URed VBlueW Black; Length:80 (mm)
Signal wire: wire size: 24#; Length: 200 (mm); Connector specification: 3pin DuPont terminal
Types suitable for T head:     Rubber head Specification:¢3.5*12
Thrum heat shrinkable catheter specification: ¢4.5*20;         Color: Red, White, Black 
Heat sink specification: 29*40 (with gear)                    Color: Silver
Electric heat shrinkable catheter tone specification:¢35*80       Color: Red
Manufacturers’ standard specification
Parameter settings of ESC:
Brake Setting: On/Off, the default is off;
Setting for battery type: LiPo (lithium) or NiCd/ NiMh (nickel metal hydride / nickel at), the default is LiPo;
Low-voltageprotectionthreshold setting: low / medium / high, the default is medium (3.0v/65%);
Motor timingsetting (increasethe efficiency and the start stability of the electronic governor): low/medium/high, the default is medium (3.0v/65%);
Accelerated startup setting (for precision gearboxes and helicopters): (provide the rapid accelerated startup with linear throttle response), the default is soft;
Helicopter mode (for helicopters), the default is off;
Motor steering (clockwise / counterclockwise): forward steering / reverse steering, the default is forward steering;
PWM operating frequency: 8 KHz/ 16KHz, the default is 8 KHz;
Low voltage protection modes (lower power or stop immediately): lower power / immediately stop, the default is lower power.
Standard configuration:
Power line length: 100 (mm)   UVW linelength:80(mm), no rubber head or T head    SBEC 5.5V/4A
Live chat
LiveZilla Live Help
Subscribe to newsletters
Email: