1W Green laser module Parameters(YNLASER234)
1000mw(1W) 532nm DPSS green laser is featured with ultra compact, longer lifetime, lower cost and easier operation, which is is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, laser lighting show, etc.
$1,096.00 (USD)
~
$1,498.00 (USD)
The LD Pumped 532nm 1000mw(1W) Green Lasers we manufacture are featured with high reliability, high stability, high efficiency, low noise and excellent laser beam quality. These lasers are specificly designed for OEM, scientific and industrial use.
LD-pumped 532nm 1000mw(1W) green lasers are the crystallization of end-pumped technology and optical non-linear frequency doubling technology. The astigmatism compensation applied and the special design that fits for holding up thermal effects has greatly enhanced the conversion efficiency of green laser light and beam quality.
We custom make these labs lasers to meet your specific applications. Just don't hesitate to submit your lab application request to us and we do our best to meet your requirements. Available with TTL and Analog modulation. We've been partnering with a number of universities and labs at home and abroad.
General Features:
* Unique BWW-styple Heat Sink Panel and Tec cooling and
* Low Price, Compact design and Maintenance-free
* Longest Operation Time and High stability & efficiency
* Efficient DPSS technology runs on standard AC power
* >10,000 hours continuous maintenance-free operating life
* TTL and Analog modulation. Optional.
* 5V/220V Power supply, optional
* FDA compliant Power Drivers, available (85– 264 V, 47 – 63 Hz)
* LED display showing LD current
* FDA CDRH Compliant Class IIIb / Class IV enclosure
|
Wavelength
|
532nm
|
|
Operating mode
|
CW
|
|
Output power
|
＞1W
|
|
Spatial mode
|
Near TEM00
|
|
Longitudinal mode
|
Multi
|
|
Spectral linewidth
|
0.1nm
|
|
Coherence length
|
0.5m
|
|
Polarization
|
Linear vertical
|
|
Polarization ratio
|
>100:1
|
|
Beam quality
|
M2<2
|
|
Beam divergence full angle
|
2mrad
|
|
Beam diameter at aperture
|
3mm
|
|
Beam ellipticity
|
1±0.1
|
|
Beam pointing stability
|
0.03mrad
|
|
Noise
|
<15% 10Hz-50MHz
|
|
Power stability
|
±5% over 8 hrs rms
|
|
Optical axis height
|
29mm
|
|
Size of laser head
|
L×W×H=155×77×60mm
|
|
Size of power supply
|
L×W×H=238×146×94mm
|
|
Cabel-laser head
|
1.0, 1.5m
|
|
Weight of laser head
|
0.9kg
|
|
Weight of power supply
|
2.2kg
|
|
TTL modulation
|
0V-no lasing, 5V-lasing
|
|
Frequency of TTL
|
1kHz-30kHz
|
|
Efficiency of TTL
|
40%-60%
|
|
Analogue modulation
|
0-5V
|
|
Frequency of analogue
|
1kHz-20kHz
|
|
Cooling mode
|
TEC
|
|
Operating votage
|
90-260VAC
|
|
Maximum power consumption
|
20W
|
|
Warm-up time
|
15 mintues
|
|
Operating temperature
|
10-35℃
|
|
Storage temperature
|
-20-60℃(<90% relative humidity, non-condensing)
|
|
Expected life time
|
10,000 hours
|
|
Warranty time
|
1 year
|
Applications:
Laser pumping source, UV-multiplier, laser light show, laser medicine, optical disc technology, underwater optical communication, laser spectroscopy, laser marking and so on.
